The online demo for the Microsoft 70-417 dumps Upgrading Your Skills to MCSA Windows Server 2012 exam can also be obtained from the website free of cost. There is no need to provide any credit card detail or any other transaction detail since this Microsoft 70-417 exam demo is completely free. Pass4itsure 100% Passing Guarantee Microsoft https://www.pass4itsure.com/70-417.html dumps exam latest questions for Windows video series is what you need to take.
Exam Code: 70-417
Exam Name: Upgrading Your Skills to MCSA Windows Server 2012
Updated: Aug 13, 2017
Q&As: 427
[Updated August 2017 Microsoft 70-417 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWMTI2YWpnc1ZUOXM
[Updated August 2017 Cisco 642-998 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWX3NiOF92ell5SjA
The actual dumps of Microsoft 70-417 has some additional material for better preparation of 70-417 dumps MCSE exam which is not available in demo.
DEMO
QUESTION 1
Your network contains an Active Directory domain named adatum.com. The domain contains three domain
controllers. The domain controllers are configured as shown in the following table.
DC3 loses network connectivity due to a hardware failure.
You plan to remove DC3 from the domain.
You log on to DC3.
You need to identify which service location (SRV) records are registered by DC3.
What should you do?
A. Open the %windir%\system32\dns\backup\adatum.com.dns file.
B. Open the %windir%\system32\config\netlogon.dns file.
C. Run ipconfig /displaydns.
D. Run dcdiag /test:dns.
70-417 exam Correct Answer: B
QUESTION 2
Your network contains a Hyper-V host named Server1 that hosts 20 virtual machines.
You need to view the amount of memory resources and processor resources each virtual machine uses
currently.
Which tool should you use on Server1?
A. Resource Monitor
B. Task Manager
C. Hyper-V Manager
D. Windows System Resource Manager (WSRM)
Correct Answer: C
QUESTION 3
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server
role installed.
The disks on Server1 are configured as shown in the exhibit. (Click the Exhibit button.)
You create a virtual machine on Server1.
You need to ensure that you can configure a pass-through disk for the virtual machine.
What should you do?
A. Convert Disk 1 to a GPT disk.
B. Convert Disk 1 to a dynamic disk.
C. Delete partition E.
D. Take Disk 1 offline.
70-417 dumps Correct Answer: D
QUESTION 4
Your network contains an Active Directory domain named contoso.com. The Active Directory Recycle bin
is enabled for contoso.com.
A support technician accidentally deletes a user account named User1.
You need to restore the User1 account.
Which tool should you use?
A. Ldp
B. Esentutl
C. Active Directory Administrative Center
D. Ntdsutil
Correct Answer: C
QUESTION 5
Your network contains an Active Directory domain named contoso.com. The domain contains four servers
named Server1, Server2, Server3, and Server4 that run Windows Server 2012 R2. All servers have the
Hyper-V server role and the Failover Clustering feature installed.
The servers are configured as shown in the following table.
You need to replicate virtual machines from Cluster1 to Cluster2.
Which three actions should you perform? (Each correct answer presents part of the solution.
Choose three.)
A. From Hyper-V Manager on a node in Cluster2, create three virtual machines.
B. From Cluster2, add and configure the Hyper-V Replica Broker role.
C. From Failover Cluster Manager on Cluster1, configure each virtual machine for replication.
D. From Cluster1, add and configure the Hyper-V Replica Broker role.
E. From Hyper-V Manager on a node in Cluster2/ modify the Hyper-V settings.
70-417 pdf Correct Answer: BCD
QUESTION 6
Your network contains an Active Directory domain named contoso.com. The domain contains a server
named Server1 that runs Windows Server 2012 R2.
Server1 is an enterprise root certification authority (CA) for contoso.com.
Your user account is assigned the certificate manager role and the auditor role on the contoso.com CA.
Your account is a member of the local Administrators group on Server1.
You enable CA role separation on Server1.
You need to ensure that you can manage the certificates on the CA.
What should you do?
A. Remove your user account from the local Administrators group.
B. Assign the CA administrator role to your user account.
C. Assign your user account the Bypass traverse checking user right.
D. Remove your user account from the Manage auditing and security log user right.
Correct Answer: D
QUESTION 7
HOTSPOT
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain.
The forest contains two Active Directory sites named Site1 and Site2.
You plan to deploy a read-only domain controller (RODC) named DC10 to Site2. You pre-create the DC10
domain controller account by using Active Directory Users and Computers.
You need to identify which domain controller will be used for initial replication during the promotion of the
RODC.
Which tab should you use to identify the domain controller?
To answer, select the appropriate tab in the answer area.
Hot Area:
Hot Area:
70-417 vce Correct Answer:
QUESTION 8
DRAG DROP
Your network contains an Active Directory domain named contoso.com. The domain contains four member
servers named Server 1, Server2, Server3, and Server4. All servers run Windows Server 2012 R2.
Server1 and Server2 are located in a site named Site1. Server3 and Server4 are located in a site named
Site2. The servers are configured as nodes in a failover cluster named Cluster1.
Cluster1 is configured to use the Node Majority quorum configuration.
You need to ensure that Server1 is the only server in Site1 that can vote to maintain quorum.
What should you run from Windows PowerShell?
To answer, drag the appropriate commands to the correct location. Each command may be used once,
more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Select and Place:
Correct Answer:
QUESTION 9
DRAG DROP
Your network contains four servers that run Windows Server 2012 R2.
Each server has the Failover Clustering feature installed. Each server has three network adapters
installed. An iSCSI SAN is available on the network.
You create a failover cluster named Cluster1. You add the servers to the cluster.
You plan to configure the network settings of each server node as shown in the following table.
You need to configure the network settings for Cluster1.
What should you do?
To answer, drag the appropriate network communication setting to the correct cluster network or networks.
Each network communication setting may be used once, more than once, or not at all. You may need to
drag the split bar between panes or scroll to view content.
Select and Place:
70-417 exam Correct Answer:
QUESTION 10
DRAG DROP
Your network contains an Active Directory forest named contoso.com.
Recently, all of the domain controllers that ran Windows Server 2003 were replaced by domain controllers
that run Windows Server 2012 R2.
From Event Viewer, you discover SYSVOL journal wrap errors on a domain controller named
dc10.contoso.com.
You need to perform a non-authoritative synchronization of SYSVOL on DC10.
Which three actions should you perform on DC10?
To answer, move the three appropriate actions from the list of actions to the answer area and arrange
them in the correct order.
Select and Place:
Select and Place:
Correct Answer:
QUESTION 11
HOTSPOT
Your network contains a RADIUS server named Admin1.
You install a new server named Server2 that runs Windows Server 2012 R2 and has Network Policy
Server (NPS) installed.
You need to ensure that all accounting requests for Server2 are forwarded to Admin1.
On Server2, you create a new remote RADIUS server group named Group1 that contains Admin1.
What should you configure next on Server2?
To answer, select the appropriate node in the answer area.
Hot Area:
70-417 dumps Correct Answer:
QUESTION 12
DRAG DROP
Your network contains an Active Directory domain named adatum.com. The domain contains three
servers. The servers are configured as shown in the following table.
Server1 is configured as shown in the exhibit. (Click the Exhibit button.)
Template1 contains custom cryptography settings that are required by the corporate security team.
On Server2, an administrator successfully installs a certificate based on Template1.
The administrator reports that Template1 is not listed in the Certificate Enrollment wizard on Server3, even
after selecting the Show all templates check box.
You need to ensure that you can install a server authentication certificate on Server3. The certificate must
comply with the cryptography requirements.
Which three actions should you perform in sequence?
To answer, move the appropriate three actions from the list of actions to the answer area and arrange
them in the correct order.
Select and Place:
Select and Place:
Correct Answer:
QUESTION 13
Your network contains an Active Directory domain named contoso.com. The domain contains a file server
named Server1 that runs Windows Server 2012 R2. You create a user account named User1 in the
domain.
You need to ensure that User1 can use Windows Server Backup to back up Server1.
The solution must minimize the number of administrative rights assigned to User1.
What should you do?
A. Assign User1 the Back up files and directories user right.
B. Add User1 to the Backup Operators group.
C. Add User1 to the Power Users group.
D. Assign User1 the Back up files and directories user right and the Restore files and directories user
right.
70-417 pdf Correct Answer: A
QUESTION 14
Your network contains an Active Directory forest named contoso.com. The forest contains two sites named
Main and Branch. The Main site contains 400 desktop computers and the Branch site contains 150
desktop computers. All of the desktop computers run Windows 8.
In Main, the network contains a member server named Server1 that runs Windows Server 2012. You
install the Windows Server Update Services server role on Server1.
You need to ensure that Windows updates obtained from Windows Server Update Services (WSUS) are
the same for the computers in each site.
You want to achieve this goal by using the minimum amount of administrative effort.
What should you do?
A. From the Update Services console, create computer groups
B. From the Update Services console, configure the Computers options
C. From the Group Policy Management console, configure the Windows Update settings
D. From the Group Policy Management console, configure the Windows Anytime Upgrade settings
E. From the Update Services console, configure the Synchronization Schedule options
Correct Answer: C
QUESTION 15
Your network contains three servers named Server1, Server2, and Server3. All servers run Windows
Server 2012 R2.
You need to ensure that Server1 can provide iSCSI storage for Server2 and Server3. What should you do
on Server1?
A. Install the iSCSI Target Server role service and configure iSCSI targets
B. Start the Microsoft iSCSI Initiator Service and configure the iSCSI Initiator Properties
C. Install the iSNS Server service feature and create a Discovery Domain
D. Install the Multipath I/O (MPIO) feature and configure the MPIO Properties
70-417 vce Correct Answer: A
In order to get all the features of this Pass4itsure 70-417 dumps exam product, you will be required to purchase that product. The Pass4itsure https://www.pass4itsure.com/70-417.html dumps is available in both PDF as well as desktop practice test software format.