Why CCNA 200-301 dumps are so important?
CCNA 200-301 dumps are really useful exam material for CCNA certification exam candidates! It contains all the topic exam content of the CCNA certification exam! And it provides two practice tools, PDF and VCE, to help you easily learn and efficiently complete the target work!
CCNA 200-301 dumps updated throughout the year! It can be guaranteed to be true and effective no matter when it is used at any time!
Download the most important CCNA 200-301 dumps for you: https://www.leads4pass.com/200-301.html, get 1297 latest exam questions and answers, and help you pass the exam 100% successfully.
Share some of the most important CCNA 200-301 dumps exam materials for free
| From | Number of exam questions | Associated certification | Exam Preparation |
| Pass4itsure | 15 | CCNA | 200-301 |
Question 1:
Refer to the exhibit.
Which next-hop IP address does Router1 use for packets destined to host 10.10.13.158?
A. 10.10.10.9
B. 10.10.10.5
C. 10.10.11.2
D. 10.10.12.2
Correct Answer: A
144/28 145-158 (Broadcast 159)
The options below do not cover 10.10.13.158.
128/28 129-142 (Broadcast 143)
160/29 161-166 (Broadcast 167)
208/29 209-214 (Broadcast 215)
Question 2:
Refer to the exhibit.
An engineer is updating the management access configuration of switch SW1 to allow secured, encrypted remote configuration. Which two commands or command sequences must the engineer apply to the switch? (Choose two.)
A. SW1(config)#enable secret ccnaTest123
B. SW1(config)#username NEW secret R3mote123
C. SW1(config)#line vty 0 15 SW1(config-line)#transport input ssh
D. SW1(config)# crypto key generate rsa
E. SW1(config)# interface f0/1 SW1(config-if)# switchport mode trunk
Correct Answer: AC
SSH test on PT without the enable secret below and it really shows that you can\’t access:
Cisco Packet Tracer PC Command Line 1.0
C:\>ssh -l Pablo 10.0.32.2
Password: xxx
SW3>
SW3>enable
% No password set.
SW3>
Question 3:
A network engineer must configure the router R1 GigabitEthernet1/1 interface to connect to the router R2 GigabitEthernet1/1 interface. For the configuration to be applied the engineer must compress the address 2001:0db8:0000:0000:0500:000a:400F:583B. Which command must be issued on the interface?
A. ipv6 address 2001:0db8::5: a: 4F 583B
B. ipv6 address 2001:db8::500:a:400F:583B
C. ipv6 address 2001 db8:0::500:a:4F:583B
D. ipv6 address 2001::db8:0000::500:a:400F:583B
Correct Answer: B
Question 4:
A network engineer is configuring a switch so that it is remotely reachable via SSH. The engineer has already configured the hostname on the router. Which additional command must the engineer configure before entering the command to generate the RSA key?
A. password Password
B. crypto key generates rsa modulus 1024
C. ip domain-name domain
D. ip ssh authentication-retries 2
Correct Answer: C
Question 5:
Refer to the exhibit. R1 learns all routes via OSPF
Which command configures a backup static route on R1 to reach the 192.168.20.0/24 network via R3?
A. R1(config)#ip route 192.168.20.0 255.255.0.0 192.168.30.2
B. R1(config)#ip route 192.168.20.0 255.255.255.0 192.168.30.2 90
C. R1(config)#ip route 192.168.20.0 255.255.255.0 192.168.30.2 111
D. R1(config)#ip route 192.168.20.0 255.255.255.0 192.168.30.2
Correct Answer: B
Question 6:
An engineer needs to add an old switch back into a network. To prevent the switch from corrupting the VLAN database which action must be taken?
A. Add the switch in the VTP domain with a lower revision number
B. Add the switch with DTP set to dynamic desirable
C. Add the switch in the VTP domain with a higher revision number
D. Add the switch with DTP set to desirable
Correct Answer: A
One danger of VTP:
If you connect an old switch with a higher revision number to your network (and the VTP domain name matches), all switches in the domain will sync their VLAN database to that switch.
Question 7:
With REST API, which standard HTTP header tells a server which media type is expected by the client?
A. Accept-Encoding: gzip. deflate
B. Accept-Patch: text/example; charset=utf-8
C. Content-Type: application/json; charset=utf-8
D. Accept: application/json
Correct Answer: D
Accept header is a way for a client to specify the media type of the response content it is expecting and Content-type is a way to specify the media type of request being sent from the client to the server.
Question 8:
What is the primary purpose of private address space?
A. conserve globally unique address space
B. simplify the addressing in the network
C. limit the number of nodes reachable via the Internet
D. reduce network complexity
Correct Answer: A
Question 9:
What is the destination MAC address of a broadcast frame?
A. 00:00:0c:07:ac:01
B. ff:ff:ff:ff:ff:ff
C. 43:2e:08:00:00:0c
D. 00:00:0c:43:2e:08
E. 00:00:0c:ff:ff:ff
Correct Answer: B
Ref: Broadcast Frame – an overview | ScienceDirect Topics
Cisco IOS Switch Basics
Switch Concepts Broadcasts… Layer 2 broadcast frames have a destination Media Access Control (MAC) address of FF:FF:FF:FF:FF: FF and Layer 3 broadcast addresses have a destination Internet Protocol (IP) address that is set for the broadcast of that particular network (the address varies, so don\’t always assume that an IP address ending with 255 is the broadcast address).
Question 10:
What is the function of the control plane?
A. It exchanges routing table information.
B. It provides CLI access to the network device.
C. It looks up an egress interface in the forwarding information base.
D. It forwards traffic to the next hop.
Correct Answer: A
The control plane is responsible for the exchange of routing table information between routers. The control plane sets up and maintains the routing tables that the data plane uses to forward packets. It provides a way for routers to learn about the networks they are directly connected to, as well as about other networks that are reachable through other routers.
Question 11:
What must be considered when using 802.11a?
A. It is chosen over 802.11b when a lower-cost solution is necessary
B. It is susceptible to interference from 2.4 GHz devices such as microwave ovens
C. It is compatible with 802.11b- and 802-11g-compliant wireless devices
D. It is used in place of 802.11b/g when many nonoverlapping channels are required
Correct Answer: D
802.11.a is a 5GHz standard
Question 12:
Refer to the exhibit.
An engineer is checking the routing table in the main router to identify the path to a server on the network. Which route does the router use to reach the server at 192.168.2.2?
A. S 192.168.0.0/20 [1/0] via 10.1.1.1
B. S 192.168.2.0/29 [1/0] via 10.1.1.1
C. S 192.168.2.0/28 [1/0] via 10.1.1.1
D. S 192.168.1.0/30 [1/0] via 10.1.1.1
Correct Answer: B
Question 13:
Refer to the exhibit.
Between which zones do wireless users expect to experience intermittent connectivity?
A. between zones 1 and 2
B. between zones 2 and 5
C. between zones 3 and 4
D. between zones 3 and 6
Correct Answer: C
Zones 3 and 4 both have Channel 11 that overlapped. Zones 3 and 6 do not overlap at all.
Question 14:
Which two wireless security standards use counter mode cipher block chaining Message Authentication Code Protocol for encryption and data integrity? (Choose two.)
A. Wi-Fi 6
B. WPA3
C. WEP
D. WPA2
E. WPA
Correct Answer: BC
Question 15:
Which protocol uses the SSL?
A. HTTP
B. SSH
C. HTTPS
D. Telnet
Correct Answer: C
HTTPS (port 443, TCP): HTTPS combines HTTP with a security protocol (Secure Sockets Layer [SSL]/Transport Layer Security[TLS]). DNS (port 53, TCP, and UDP): DNS is used to resolve Internet names to IP addresses.
…
CCNA 200-301 dumps are really important for you!
CCNA 200-301 dumps can help you prepare before participating in the actual scene! You only need to use PDF or VCE tools to practice all the mock exam questions completely! Guarantee your success rate of more than 99%!
Download the CCNA 200-301 dumps exam materials that are really important to you: https://www.leads4pass.com/200-301.html, to help you succeed in the exam easily.