Accurate Microsoft 70-744 Dumps – Download Free PDF for 70-744 Exam

Easyhometraining is an excellent source of information about IT certification. In easyhometraining, you can find study skills and study materials for the Microsoft 70-744 exam. Pass4itsure Microsoft MCSE 70-744 latest dumps https://www.pass4itsure.com/70-744.html Share some Microsoft 70-744 exam dumps pdf questions and answers below.

Full accurate Microsoft 70-744 Dumps PDF https://drive.google.com/file/d/1DAP4xuLgVFbyOrRY42UMLCSvIlNfN-SN/view?usp=sharing

Use Coupon code “2020PASS” to enjoy 12% off

Pass4itsure-discount-code-2020

70-744 Exam Study Material

[Video] Latest Microsoft 70-744 dumps Practice test Questions and answers

Microsoft Certified Solutions Expert 70-744 Exam Questions Answers

QUESTION 1
Note: This question is part of a series of question that use the same or similar answer choices. An answer choice may
be correct for more than one question in the series. Each question is Independent of the other questions in this series.
Information and details provided in a question apply only to that question.
Your network contains an Active Directory domain named contoso.com. The domain contains a file server named
Server1 that runs Windows Server 2016.
Server1 has a volume named Volume1.
Dynamic Access Control is configured. A resource property named Property1 was created in the domain.
You need to ensure that Property1 is set to a value of Big for all of the files in Volume1 that are larger than 10 MB.
Which tool should you use?
A. File Explorer
B. Shared Folders
C. Server Manager
D. Disk Management
E. Storage Explorer
F. Computer Management
G. System Configuration
H. File Server Resource Manager (FSRM)
Correct Answer: H
Automatic File Classification of FSRM
https://docs.microsoft.com/en-us/windows-server/identity/solution-guides/deploy-automatic-fileclassification?demonstration-steps https:// blogs.technet.microsoft.com/filecab/2009/08/13/using-windows-powershellscripts-for-file-classification/

QUESTION 2
DRAG DROP
Your network contains an Active Directory domain named contoso.com. The domain functional level is Windows Server
2016. The domain contains a member server named Server1.
You test Code Integrity on Server1 in audit mode.
You need to enforce the Code Integrity levels on all the Windows Server 2016 servers in the domain.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to
the answer area and arrange them in the correct order.
Select and Place:

Easyhometraining 70-744 exam questions-q2

Correct Answer:

Easyhometraining 70-744 exam questions-q2-2

https://blogs.technet.microsoft.com/datacentersecurity/2018/03/10/default-code-integrity-policy-for-windows-server/

QUESTION 3
Vout network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server
2016.
The domain contains a server named Serverl that has Microsoft Security Compliance Manager (SCM) 4.0 installed.
You export the baseline shown in the following exhibit.

Easyhometraining 70-744 exam questions-q3

 You have a server named Server2 that is a member of a workgroup.
You copy the (2617e9b1-9672-492b-aefa-0505054848c2) folder to Server2.
You need to deploy the baseline settings to Server2.
What should you do?
A. Download, install, and then fun the Lgpo.exe command.
B. From Group Policy Management import a Group Policy object (GPO).
C. From Windows PowerShell, run the Restore-GPO cmdlet.
D. From Windows PowerShell, run the Import-GPO cmdlet.
E. From a command prompt run the secedit.exe command and specify the /import parameter.
Correct Answer: D
References: https://anytecho.wordpress.com/2015/05/22/importing-group-policies-using-powershell-almost/

QUESTION 4
You have a server named Server1.
You need to configure PowerShell logging to capture dynamic code generation. The solution must minimize the number
of events that are logged.
What should you configure?
A. protected event logging
B. script block logging
C. module logging
D. system-wide transcription
Correct Answer: C
References: https://www.rootusers.com/enable-and-configure-module-script-block-and-transcription-logging-in-windowspowershell/

QUESTION 5
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not
QUESTION 5
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2016. All client
computers run Windows 10.
The relevant objects in the domain are configured as shown in the following table.
 

Easyhometraining 70-744 exam questions-q5

You need to assign User1 the right to restore files and folders on Server1 and Server2.
Solution: You add User1 to the Backup Operators group in contoso.com.
Does this meet the goal?
A. Yes
B. No
Correct Answer: A
References:
https://technet.microsoft.com/en-us/library/cc771990(v=ws.11).aspx
users.The solution would let User1 to backup files and folders on domain controllers for contoso.com instead.

QUESTION 6
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1
that runs Windows Server 2016. The services on Server1 are shown in the following output.

Easyhometraining 70-744 exam questions-q6

Server1 has the AppLocker rules configured as shown in the exhibit (Click the Exhibit button.) Rule1 and Rule2 are
configured a$ shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Hot Area:

Easyhometraining 70-744 exam questions-q6-2

Correct Answer:

Easyhometraining 70-744 exam questions-q6-3

QUESTION 7
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You manage a file server that runs Windows Server 2016. The file server contains the volumes configured as shown in
the following table.

Easyhometraining 70-744 exam questions-q7

You need to encrypt DevFiles by using BitLocker Drive Encryption (ButLocker).
Solution: You run the Enable-BitLocker cmdlet.
Does this meet the goal?
A. Yes
B. No
Correct Answer: A
 References: https://docs.microsoft.com/en-us/powershell/module/bitlocker/enable-bitlocker?view=win10-ps

QUESTION 8
Your network contains an internal network and a perimeter network. The internal network contains an Active Directory
forest named contoso.com. You deploy five servers to the perimeter network.
All of the servers run Windows Server 2016 and are the members of a workgroup.
You need to apply a security baseline named Perimeter.inf to the servers in the perimeter network.
What should you use to apply Perimeter.inf?
A. Local Computer Policy
B. Security Configuration Wizard (SCW)
C. Group Policy Management
D. Server Manager
Correct Answer: A
https://docs.microsoft.com/en-us/windows-server/get-started/deprecated-features
https://blogs.technet.microsoft.com/secguide/2016/01/21/lgpo-exe-local-group-policy-object-utility-v1-0/
https://msdn.microsoft.com/en-us/library/bb742512.aspx

Easyhometraining 70-744 exam questions-q8

You need to identify which server you must modify to support the planned implementation. Which server should you
identify?
A. Server1
B. Server2
C. Server3
D. Server4
Correct Answer: D
References: https://docs.microsoft.com/en-us/windows/access-protection/credential-guard/credentialguardrequirements

QUESTION 10
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario b
repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is
exactly the same in each question in this series.
Start of repeated scenario
Your network contains an Active Directory domain named contoso.com. The functional level of the forest and the
domain is Windows Server 2008 R2.
The domain contains the servers configured as shown m the following table.

Easyhometraining 70-744 exam questions-q10

All servers run Windows Server 2016. All client computers run Windows 10.
You have an organizational unit (OU) named Marketing that contains the computers in the marketing department You
have an OU named Finance that contains the computers in the finance department You have an OU named
AppServers
that contains application servers. A Group Policy object (GPO) named GP1 is linked to the Marketing OU. A GPO
named GP2 is linked to the AppServers OU.
You install Windows Defender on Nano1.
End of repeated scenario
You need to disable SMB 1.0 on Server2.
What should you do?
A. From File Server Resource Manager, create a classification rule.
B. From the properties of each network adapter on Server2. modify the bindings.
C. From Windows PowerShell, run the Set -SmbClientConfiguration cmdlet.
D. From Server Manager, remove a Windows feature.
Correct Answer: D
https://support.microsoft.com/en-us/help/2696547/how-to-enable-and-disable-smbv1-smbv2-and-smbv3-inwindows-andwindows

Easyhometraining 70-744 exam questions-q10-2

QUESTION 11
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1
that runs Windows Server 2016.
The hardware configuration on Server1 meets the requirements for Credential Guard.
You need to enable Credential Guard on Server1.
What should you do? To answer, select the appropriate options in the answer area.
Hot Area:

Easyhometraining 70-744 exam questions-q11

Correct Answer:  Easyhometraining 70-744 exam questions-q11-2

https://docs.microsoft.com/en-us/windows/access-protection/credential-guard/credential-guard-requirements The
Virtualization-based security requires:-64-bit CPU-CPU virtualization extensions plus extended page tables-Windows
hypervisor https://docs.microsoft.com/en-us/windows/access-protection/credential-guard/credential-guardmanage#hardware-readiness-tool

You should get assistance from Pass4itsure by downloading the most recent 70-744 test dumps for your Microsoft 70-744 test.

Pass4itsure-Reason-for-selection

Free Microsoft 70-744 Dumps PDF https://drive.google.com/file/d/1DAP4xuLgVFbyOrRY42UMLCSvIlNfN-SN/view?usp=sharing

70-744 Dumps for guarantee Success in 70-744 exam https://www.pass4itsure.com/70-744.html No matter how high your pursuit of the goal, Pass4itsure will make your dreams become a reality.

Free Microsoft 70-743 dumps, pass the exam

Passing Microsoft MCSA 70-743 for the first time is a very important task. In order to ensure your energy, time and money, easyhometraining provides free 70-743 exam dumps, where you can easily download the 70-743 question answer pdf. https://www.pass4itsure.com/70-743.html 70-743 dumps contains the latest 70-743 questions pdf contains updated 70-743 questions.

Why choose Microsoft 70-743 dumps?

As we all know, the Microsoft 70-743 exam is a popular exam for IT certification. Pass4itsure MCSA 70-743 exam dumps are designed to help IT professionals make full use of their knowledge and experience, combined with years of experience in the latest syllabus.

Pass4itsure-Reason-for-selection

Microsoft 70-742 Complete Study Guide Free

Pass4itsure teaches you the effective Microsoft 70-743 exam preparation methods: 70-743 dumps

  • Pass4itsure will provide you 100% Valid 70-743 exam questions with verified answers that reflect the actual exam.
  • Get 100% Success Guarantee to Pass Your Microsoft 70-743 Exam using our Updated Exam Questions and Answers.
  • With the Microsoft 70-743 exam pass, you can be assured of your own position in this society, and you can even enjoy life even more in the highly competitive IT age.

70-743 Authentic and Real Exam Questions Answers Dumps PDF Free

[100% Free] Microsoft 70-743 Exam Dumps PDF https://drive.google.com/file/d/12WOYpAdFpl2Y0LQ0GS4umHElAqbq0RWY/view?usp=sharing

Microsoft 70-743 exam video

Microsoft Certified Solutions Associate 70-743 dumps practice questions

QUESTION 1
You implement Software Defined Networking (SDN) by using the Network Controller server role.
You have a virtual network named VNET1 that contains servers used by developers.
You need to ensure that only devices from the 192.168.0.0/24 subnet can access the virtual machine in VNET1.
What should you configure?
A. Dynamic Access Control
B. role-based access control
C. a network security group (NSG)
D. a universal security group
Correct Answer: C


QUESTION 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
Your network contains an Active Directory domain named contoso.com. The domain contains two domain controllers
named DC1 and DC2.
DC1 holds the RID master operations role.
DC1 fails and cannot be repaired.
You need to move the RID role to DC2.
Solution: On DC2, you open Active Directory Users and Computers, click Operations Masters…, verify that
dc2.contoso.com is listed on the RID tab, and click Change.
Does this meet the goal?
A. Yes
B. No
Correct Answer: A
There are 3 ways of transferring FSMO roles:
Using graphical user interface available on a DC or any server/workstation with Administrative Tools / Remote Server
Administration Tools installed.
Using the command-line tool called ntdsutil.
Using the PowerShell cmdlet Move-ADDirectoryServerOperationMasterRole.
References:
http://kpytko.pl/active-directory-domain-services/transferring-fsmo-roles-from-gui/
http://kpytko.pl/active-directory-domain-services/transferring-fsmo-roles-with-powershell/
http://kpytko.pl/active-directory-domain-services/transferring-fsmo-roles-from-command-line/

QUESTION 3
Your network contains an Active Directory domain named adatum.com. The domain contains two servers named
Server1 and Server2 that run Windows Server 2016. The domain contains three users named User1, User 2 and User
3. Server 1 has a share named Share1 that has the following configurations.

Easyhometraining 70-743 exam questions-q3

 The Share permissions for Share1 are configured as shown in Share1 Exhibit.

Easyhometraining 70-743 exam questions-q3-2

Share1 contains a file named File1.txt. The Advanced Security settings for File1.txt are configured as shown in the
File1.txt exhibit.

Easyhometraining 70-743 exam questions-q3-3

Select the appropriate statement from below. Select Yes if the state is true , otherwise no.
Hot Area:

Easyhometraining 70-743 exam questions-q3-4

QUESTION 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions,
while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You have a Hyper-V named Server1. The network adapters on Server1 have single root I/O virtualization (SR-IOV)
enabled.
Server1 hosts a virtual machine named VM1 that runs Windows Server 2016.
You need to identify whether SR-IOV is used by VM1.
Solution: You sign in to VM1. You open Device Manager and view the properties of the network adapters.
Does this meet the goal?
A. Yes
B. No
Correct Answer: A

QUESTION 5
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may
be correct for more than one question in the series. Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question.
You have two servers named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 have the HyperV server role installed and are nodes in a failover cluster.
On Server1, an administrator creates a virtual machine named VM1.
You need to configure VM1 for high availability.
Which tool should you use?
A. the clussvc.exe command
B. the cluster.exe command
C. the Computer Management snap-in
D. the configurehyperv.exe command
E. the Disk Management snap-in
F. the Failover Cluster Manager snap-in
G. the Hyper-V Manager snap-in
H. the Server Manager app
Correct Answer: F
References: http://windowsitpro.com/hyper-v/make-vm-highly-available-windows-server-2012

QUESTION 6
Server1 download update from Microsoft update.
You have Server2 that must synchronize update from Server1.
Have firewall separate between Server1 and Server2. Which port should to open on Server2 to synchronize?
A. 80
B. 443
C. 3389
D. 8530
Correct Answer: D

QUESTION 7
You have a container host named Server1 that runs Windows Server 2016.
You need to start a Hyper-V container on Server1.
Which parameter should you use with the docker run command?
A. –runtime
B. –isolation
C. –entrypoint
D. –privileged
E. –expose
Correct Answer: B

QUESTION 8
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has two network adaptors named
NK1 and NIC2. Server2 has two virtual switches named vSwitch1 and vSwitch2. N1C1 connects to vSwitch1. NIC2
connects to vSwitch2
Server1 hosts a virtual machine named VM1. VM1 has two network adapters named vmNIC1 and vmNIC1.
VmNIC1 connects to vSwitch1. VmNIC2 connects to vSwitch2.
You need to create a NIC team on VM1.
What should you run on VM1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Easyhometraining 70-743 exam questions-q8

Correct Answer:

Easyhometraining 70-743 exam questions-q8-2

QUESTION 9
You use Application Request Routing (ARR) to make internal web applications available to the Internet by using NTLM
authentication.
You need to replace ARR by using the Web Application Proxy.
Which server role should you deploy first?
A. Active Directory Rights Management Services
B. Active Directory Federation Services
C. Active Directory Certificate Services
D. Active Directory Lightweight Directory Services
Correct Answer: B

QUESTION 10
You have two servers named Server1 and Server2 that run Windows Server 2016.
Server1 has the DNS Server role installed. The advanced DNS properties for Server1 are shown in the Advanced DNS
exhibit. (Click the Exhibit button.)
Server2 is configured to use Server1 as a DNS server. Server2 has the following IP configuration.

Easyhometraining 70-743 exam questions-q10

Select the appropriate selection if statement is “Yes” or No.

Easyhometraining 70-743 exam questions-q10-2

QUESTION 11
Your company has 10 offices. Each office has a local network that contains several Hyper-V hosts that run Windows
Server 2016. All of the offices are connected by high speed, low latency WAN links.
You need to ensure that you can use QoS policies for Live Migration traffic between the offices.
Which component should you install?
A. the Canary Network Diagnostics feature
B. the Network Controller server role
C. the Data Center Bridging feature
D. the Multipath I/O feature
E. the Routing role service
Correct Answer: C
NICs with a standard NIC team and two RDMA NICs
This configuration emphasizes the use of RDMA. To converge other workloads such as Live Migration, Cluster and
Management on the same RDMA NICs, the NICs must also support Data Center Bridging (DCB). To provide high
availability
to Storage, you can enable Microsoft Multipath I/O (MPIO).
With this configuration, you can apply all QoS features, including Bandwidth Management, Classification and Tagging,
and PFC in the management operating system.
References: https://technet.microsoft.com/en-us/library/jj735302(v=ws.11).aspx
 

QUESTION 12
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions,
while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest has three sites located in London,
Paris and Berlin.
The London site contains a web server named Web1 that runs Windows Server 2016.
You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin
sites.
Solution: You install the Deployment Server role service, and then you restart the World Wide Web Publishing Service.
Does this meet the goal?
A. Yes
B. No
Correct Answer: B

QUESTION 13
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You are a server administrator at a company named Contoso, Ltd.
Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table 

Easyhometraining 70-743 exam questions-q13

All of the virtual switches are of the external type.
You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to
disconnect from the network.
Solution: You implement live migration by using Host3 and Host4.
Does this meet the goal?
A. Yes
B. No
Correct Answer: B
Live migration is a Hyper-V feature that allows you to transparently move running Virtual Machines from one Hyper-V
host to another without perceived downtime.
Common requirements for any form of live migration: Two (or more) servers running Hyper-V that:
-Support hardware virtualization.
-Use processors from the same manufacturer. For example, all AMD or all Intel.
-Belong to either the same Active Directory domain, or to domains that trust each other.
Virtual machines must be configured to use virtual hard disks or virtual Fibre Channel disks (no physical disks).
Use of an isolated network, physically or through another networking technology such as VLANs, is recommended for
live migration network traffic.
References:
https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windowsserver-2012-R2-and-2012/hh831435(v=ws.11)

Pass4itsure Discount Code 2020

The latest discount code “2020PASS” is provided below.

Pass4itsure-discount-code-2020

Study the Microsoft 70-743 dumps with https://www.pass4itsure.com/70-743.html Pass4itsure is one of the best source to provide most up-to-date Microsoft MCSA 70-743 exam dumps. Now! Don’t Waste your Time and Money on other Sources.

70-743 free dumps | 70-743 dumps | 70-743 dumps pdf | 70-743 exam questions pdf | 70-743 exam dump pdf

Don’t worry Exam | Microsoft 70-742 Complete Study Guide Free

Where can I find accurate and the latest study guide for the Microsoft 70-742? It’s here! 70-742 study guide: latest Microsoft 70-742 practice questions, latest Microsoft 70-742 pdf dumps, Microsoft 70-742 exam video learning. Are you looking for a Exam 70–742 and you want to get help, then https://www.pass4itsure.com/70-742.html 70-742 dumps is the best.

Best questions to prepare for the Microsoft MCSA 70-742 study guide

Vendor: Microsoft
Certifications: MCSA: Windows Server 2016
Exam Code: 70-742
Exam Name: Identity with Windows Server 2016

QUESTION 1
Your network contains an Active Directory domain named contoso.com.
You deploy a standalone root certification authority (CA) named CA1.
You need to autoenroll domain computers for certificates by using a custom certificate template.
What should you do first?
A. Modify the Policy Module for CA1.
B. Modify the Exit Module for CA1.
C. Install a standalone subordinate CA.
D. Install an enterprise subordinate CA.
Correct Answer: D
You can\\’t create templates or configure auto-enrollment on a standalone CA.


QUESTION 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
Your network contains an Active Directory domain named contoso.com.
A user named User1 is in an organizational unit (OU) named OU1.
You need to enable User1 to sign in as [email protected]
You need a list of groups to which User1 is either a direct member or an indirect member.
Solution: From Windows PowerShell, you run Set -Aduser User1 -UserPricncipalName [email protected]
Does this meet the goal?
A. Yes
B. No
Correct Answer: B

QUESTION 3
Your network contains an Active Directory domain named contoso.com.
Domain users use smart cards to sign in to their client computer.
Some users report that it takes a long time to sign in to their computer and that the logon attempt times out, so they
must restart the sign in process.
You discover that the issues to checking the certificate revocation list (CRL) of the smart card certificates.
You need to resolve the issue without diminishing the security of the smart card logons.
What should you do?
A. From the properties of the smart card\\’s certificate template, modify the Request Handling settings.
B. From the properties of the smart card\\’s certificate template, modify the Issuance Requirements settings.
C. Deactivate certificate revocation checks on the computers.
D. Implement an Online Certification Status Protocol (OCSP) responder.
Correct Answer: D


QUESTION 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
Your network contains an Active Directory domain named contoso.com.
The user account for a user named User1 is in an organizational unit (OU) named OU1.
You need to enable User1 to sign in as [email protected]
Solution: From Active Directory Users and Computers, you set the E-mail property of User1 to [email protected]
Does this meet the goal?
A. Yes
B. No
Correct Answer: B

QUESTION 5
DRAG DROP
You network contains an Active Directory forest. The forest contains an Active Directory Federation Services (AD FS)
deployment.
The AD FS deployment contains the following:
*
An AD FS server named server1.contoso.com that runs Windows Server 2016
*
A Web Application Proxy used to publish AD FS
*
A LIPN that uses the contoso.com suffix
*
A namespace named adfs.contoso.com
You create a Microsoft Office 365 tenant named contoso.onmicrosoft.com. You use Microsoft Azure Active Directory
Connect (AD Connect) to synchronize all of the users and the UPNs from the contoso.com forest to Office 365.
You need to configure federation between Office 365 and the on-premises deployment of Active Directory.
Which three commands should you run in sequence from Server1? To answer, move the appropriate commands from
the list of commands to the answer area and arrange them in the correct order.
Select and Place:

Easyhometraining 70-742 exam questions-q5

Correct Answer:

Easyhometraining 70-742 exam questions-q5-2

QUESTION 6
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
Your network contains an Active Directory forest. The forest contains a domain named contoso.com. The domain
contains three domain controllers.
A domain controller named lon-dc1 fails. You are unable to repair lon-dc1.
You need to prevent the other domain controllers from attempting to replicate to lon-dc1.
Solution: From Active Directory Sites and Trusts, you transfer the operations master roles from lon-dc1.
Does this meet the goal?
A. Yes
B. No
Correct Answer: B

QUESTION 7
You have an enterprise certification authority (CA) named ContosoCA. Recovery agents are configured for ContosoCA.
You duplicate the User certificate template and name it Cont_User. You plan to issue the certificates based on
Cont_User to provide users with the ability to encrypt email messages and files.
You need to ensure that the recovery agents can access any user-encrypted files and email messages if the users lose
their certificate.
What should you do?
A. Modify the Recovery Agents settings for ContosoCA.
B. Issue a certificate based on a key recovery agent certificate.
C. Modify the Request Handling settings for Cont_User.
D. On ContosoCA, configure the Key Recovery Agent template as a certificate template to issue.
Correct Answer: C

QUESTION 8
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named
Server1 and a domain controller named DC1. Both servers run Windows Server 2016. Server1 is used to perform
administrative tasks, including managing Group Polices.
After maintenance is performed on DC1, you open a Group Policy object (GPO) from Server1 as shown in the exhibit.

Easyhometraining 70-742 exam questions-q8

You need to be able to view all of the Administrative Templates settings in GPO1. What should you do?
A. From File Explorer, copy the administrative templates from \\contoso.com\SYSVOL\contoso.com\Policies to the
PolicyDefinitions folder on Server1.
B. From File Explorer, delete \\contoso.com\SYSVOL\contoso.com\Policies\PolicyDefinitions.
C. From File Explorer, delete the PolicyDefinitions folder from Server1.
D. From Group Policy Management, configure WMI Filtering for GPO1.
Correct Answer: B

QUESTION 9
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
Your network contains the Active Directory forests and domains shown in the following table:

Easyhometraining 70-742 exam questions-q9

A two-way forest trust exists between ForestA and ForestB.
Each domain in ForestB contains user accounts that are used to manage servers.
You need to ensure that the user accounts used to manage the servers in ForestB are members of the Server
Operators in ForestA.
Solution: In each domain in ForestB, you create a global group that contains the user accounts of the respective
domain. You create a universal group in DomainBRoot. You add the new global groups to the new universal group. You
modify
the membership of the Server Operators in ForestA.
Does this meet the goal?
A. Yes
B. No
Correct Answer: A
References: https://docs.microsoft.com/en-us/windows/security/identity-protection/access-control/active-directorysecurity-groups#bkmk-serveroperators

QUESTION 10
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may
be correct for more than one question in the series. Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question.
Your network contains an Active Directory domain named contoso.com. The domain contains 5,000 user accounts.
You have a Group Policy object (GPO) named DomainPolicy that is linked to the domain and a GPO named DCPolicy
that is linked to the Domain Controllers organizational unit (OU).
You need to use the application control policy settings to prevent several applications from running on the network.
What should you do?
A. From the Computer Configuration node of DCPolicy, modify Security Settings.
B. From the Computer Configuration node of DomainPolicy, modify Security Settings.
C. From the Computer Configuration node of DomainPolicy, modify Administrative Templates.
D. From the User Configuration node of DCPolicy, modify Security Settings.
E. From the User Configuration node of DomainPolicy, modify Folder Redirection.
F. From user Configuration node of DomainPolicy, modify Administrative Templates.
G. From Preferences in the User Configuration node of DomainPolicy, modify Windows Settings.
H. From Preferences in the Computer Configuration node of DomainPolicy, modify Windows Settings.
Correct Answer: B

QUESTION 11
Your network contains an Active Directory domain named conIoso.com. The domain contains a server named
Server1 that runs Windows Server 2016. All domain joined computers have Fast logon Optimization enabled You need
to ensure that the next time a user signs in to Server1, the user-targeted Group Policy objects [GPOs) are processed
fully
before the user gains access to the desktop.
What should you run on Server1?
A. secedit with the/configure switch
B. gpupdate with the /Sync switch
C. Invoke-GPupdate with the -Boot switch
D. gpupddte with the /wait switch
Correct Answer: D

QUESTION 12
Your network contains two network domains sales.fabrikam.com, and contoso.com,
You recently added a site named Europe.
The forest contains four users who are members of the groups shown in the following table.

Easyhometraining 70-742 exam questions-q12

You need to create a Group Policy object (GPO) named GP01 and to link GPO1 to the Europe site.
Which users can perform each task? To answer, select the appropriate options in the answer area. NOTE: Each correct
selection is worth one point
Hot Area:

Easyhometraining 70-742 exam questions-q12-2

Correct Answer:

Easyhometraining 70-742 exam questions-q12-3

QUESTION 13
Your network contains an Active Directory forest named contoso.com. The forest contains three domains named
contoso.com, corp.contoso.com, and ext.contoso.com. The forest contains three Active Directory sites named Site1,
Site2, and Site3.
You have the three administrators as described in the following table.

Easyhometraining 70-742 exam questions-q13

You create a Group Policy object (GPO) named GPO1. Which administrator or administrators can link GPO1 to Site2?
A. Admin1 and Admin2 only
B. Admin1, Admin2, and Admin3
C. Admin3 only
D. Admin1 and Admin3 only
Correct Answer: D
To link an existing GPO to a site, domain, or OU, you must have Link GPOs permission on that site, domain, or OU. By
default, only domain administrators and enterprise administrators have this privilege for domains and OUs. Enterprise
administrators and domain administrators of the forest root domain have this privilege for sites.
References: https://technet.microsoft.com/en-us/library/cc732979(v=ws.11).aspx

Study guide: Microsoft 70-742 pdf dumps free download

[100% free] Microsoft 70-742 pdf dumps https://drive.google.com/file/d/1jORV37MWW45flbJ2bfcVm4b0WRQPQevS/view?usp=sharing

Microsoft 70-742 study guide video

70-742 study guide for the Microsoft 70-742 by Pass4itsure

Pass4itsure-Reason-for-selection

Exam preparation tips

70-742 study guide: For many people, exams are the most stressful. With so much effort around the results, there may be a higher degree of pressure to execute effectively. Here are some exam preparation tips to make you stand out in the exam.

Pass4itsure tips

Latest discount code “2020PASS” – Pass4itsure

The latest discount code “2020PASS” is provided below.

Pass4itsure-discount-code-2020

12% off discount, pass the exam, come soon!

Summarize:

Microsoft 70-742 dumps with valid 70-742 exam questions and answers in PDF is reliable 70-742 dumps 70-742 study guide to prepare and pass exam with high grades in only first take.

Download Your Microsoft 70-742 Dumps Study Guide Here: https://www.pass4itsure.com/70-742.html