Preparing for the Cisco 200-355 dumps but got not much time? New Updated Pass4itsure Cisco 200-355 Dumps Free Dowload, Real Cisco 200-355 Dumps Tests Is Your Best Choice, We Help You Pass Implementing Cisco Wireless Network Fundamentals – pass4itsure 200-355 dumps exam q&as.

The Pass4itsure 200-355: Implementing Cisco Wireless Network Fundamentals practice test is designed to help candidates prepare for and pass the Cisco 200-355 dumps exam. We encourage you to be confident about our 200-355 WIFUND CCNA Wireless certification test questions, and to that end, we give you a free demo of the 200-355 WIFUND CCNA Wireless certification test questions. Passing Cisco 200-355 dumps exam in first attempt is easy with the help of pass4itusure to become CCNA Wireless certified, Which consists all the necessary tools and information to help you pass 200-355 certification exam.

200-355 dumps

[Updated April 2018 Pass4itsure Cisco 200-355 Dumps PDF  From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWUkUwT0lYclNxbFU

[Updated April 2018 Pass4itsure Cisco 300-180 Dumps PDF From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWSURhODJCOVFPR1U

Do you maintain 100% Guarantee on Pass4itsure.com products?

Yes. Our PDF of CCNA Wireless 200-355 dumps exam is designed to ensure everything which you need to pass your exam successfully. At Pass4itsure.com, we have a completely customer oriented policy. In order to help the examinee to prepare, and makes them effectively will cross an easy test, Pass4itsure professionally offer the actual IT certification questions and answers. We invite the rich experience and expert knowledge of professionals from the IT certification industry to guarantee the PDF details precisely and logically. Our customers’ time is a precious concern for us. This requires us to provide you the products that can be utilized most efficiently.

200-355 dumps

Welcome to Pass4itsure Blog: Free Cisco 200-355 Dumps(16-48)

QUESTION 16
After you configure the Cisco 5508 Wireless Controller v7.6, a customer requests an SSID that allows for client web authentication with email input. Which authentication method should be used?
A. pass-through
B. authentication
C. splash page web redirect
D. conditional web redirect
E. on MAC filter failure
200-355 exam Correct Answer: A

QUESTION 17
What three characteristics are components of mobility anchoring? (Choose three.)
A. enabled as a global setting
B. enabled on a per WLAN basis
C. restricts clients to a specific subnet
D. client traffic is tunneled to predefined WLC(s)
E. only one mobility anchor is allowed per WLAN
F. acts as master controller for a mobility group
Correct Answer: BCD

QUESTION 18
A client is attached to the Cisco Unified Wireless Network using controllers. When the client is using WPA2 and EAP authentication, where are the wireless encryption keys located during the active user session? (Choose two.)
A. On the access point
B. On the RADIUS server
C. On the Cisco WCS
D. On the client
E. On the Cisco WLC
200-355 dumps Correct Answer: AD

QUESTION 19
 200-355 dumps
 200-355 dumps

QUESTION 20
Which two formats are available for Cisco WCS reports? (Choose two.)
A. PDF
B. CSV
C. HTML
D. TXT
200-355 pdf Correct Answer: AB

QUESTION 21
An enterprise needs their iPhones to connect to the EAP-TLS network. How should the devices be configured?
A. push profile and certificate through Configuration Utility
B. configure directly through Settings application
C. email certificate to device then configure through Settings application
D. download certificate from web page then configure through Settings application
E. push profile and certificate through iTunes
Correct Answer: A

QUESTION 22
Which option describes computer-to-computer wireless communication?
A. BSS and BSA
B. IBSS and ad hoc network
C. ad hoc network and BSA
D. IBSS and ESS
E. ESS and BSA
F. BSS and ad hoc network
200-355 vce Correct Answer: B

QUESTION 23
A wireless engineer is designing the wireless networking for a company with offices in two different locations. Which two regulatory bodies should they check to find the maximum EIRP allowed? (Choose two.)
A. IEEE
B. FCC
C. ITU-R
D. ETSI
E. Wi-Fi Alliance
Correct Answer: BD

QUESTION 24
A customer has asked for its wireless equipment to be managed as securely as possible. Which three management protocols will provide encrypted access to the equipment? (Choose three.)
A. Secure Shell
B. HTTPS
C. SNMPv3
D. Telnet
E. SNMPv2c
F. HTTP
200-355 exam Correct Answer: ABC

QUESTION 25
The wireless network is using controller-based APs and version 7.0 MR1. The APs appear to be connected properly to the controllers. A wireless user near one of the APs reports that they are unable to connect to the network with their pre shared key. Which option shows the GUI path where you can check the connection status of that client?
A. WLANs andgt; WLAN_ID andgt; Advanced
B. Security andgt; Clients
C. Security andgt; Advanced andgt; Clients
D. Monitor andgt; Clients
E. Wireless andgt; 802.11b/g/n andgt; clients
Correct Answer: D

QUESTION 26
What authentication method requires a certificate on both the client and authentication server?
A. PEAP
B. EAP-TLS
C. EAP-FAST
D. WPA-PSK
E. WEP
F. EAP-TTLS
200-355 dumps Correct Answer: B

QUESTION 27
What is the function of the Cisco AnyConnect DART tool?
A. creates a compressed bundle of client logs and information
B. visualizes a WLAN environment, showing the possible locations of problems
C. gathers statistics from neighboring clients for comparison to the baseline
D. helps to troubleshoot a WLAN connection by using easy-to-use wizards and statistic viewers
Correct Answer: A

QUESTION 29
A customer has completed the installation of an 802.11ac greenfield deployment at their corporate headquarters. They would like to leverage 802.11ac enhanced speeds on the trusted employee WLAN. In order to configure the employee WLAN, what Layer 2 security policies are valid?
A. WPA2 (TKIP)
B. WPA(AES)
C. OPEN
D. WEP
200-355 pdf Correct Answer: C

QUESTION 30
A customer is concerned about ease of wireless management. Which deployment model requires the highest administrative overhead to deploy and manage?
A. autonomous
B. local mode
C. cloud
D. converged
Correct Answer: A

QUESTION 31
Which three items do you need to establish a wireless connection to an enterprise wireless network? (Choose three.)
A. SSID name
B. RF channel
C. RF signal
D. 802.1X/EAP credentials
E. pre-shared key
F. web page
G. WPA/WPA2 settings
200-355 vce Correct Answer: ACD

QUESTION 32
 200-355 dumps
Correct Answer:
 200-355 dumps

QUESTION 33
Refer to the exhibit.
 200-355 dumps
What does the yellow shield with the exclamation mark indicate?
A. The network uses open authentication and no encryption.
B. The network uses an unsupported channel.
C. The signal is too distorted to connect.
D. The AP that is transmitting this SSID uses the wrong RF domain.
E. This is the ad-hoc network.
200-355 exam Correct Answer: A

QUESTION 34
An AP has been configured for personal wireless access to the Internet. Which item should be configured on the wireless client?
A. RF channel
B. BSS
C. PSK
D. 802.1X/EAP
E. broadcast SSID
F. IBSS
Correct Answer: C

QUESTION 35
A company wants to implement wireless in all 20 remote office locations and wants centralized management of these remote sites. What application would meet the requirements?
A. Control And Provisioning of Wireless Access Points
B. Cisco point- to multi-point wireless bridging
C. Cisco autonomous access points in FlexConnect mode
D. Split MAC architecture utilizing LWAPP and WLC
200-355 dumps Correct Answer: D

QUESTION 36
Which governing body analyzes the applications and environments in which wireless networks are used?
A. EIRP
B. ETSI
C. FCC
D. IEEE
E. WiFi Alliance
Correct Answer: D

QUESTION 37
Which two statements about WiMAX technology are true? (Choose two.)
A. WiMAX is defined by 802.11i.
B. Typically, fixed WiMAX networks have a higher-gain directional antenna installed near the client.
C. WiMAX is capable of working as a long-range system over several miles.
D. WiMAX works only for licensed frequencies.
200-355 pdf Correct Answer: BC

QUESTION 38
An engineer recently removed a WLC from a WCS, but the APs associated to the WLC are still showing on the WCS. What is a reason for this?
A. The associated APs must be removed manually.
B. The APs must be removed from the WCS map.
C. The hold-down timer must expire before the APs will be removed.
D. The APs must be audited.
Correct Answer: A

QUESTION 39
When Cisco AnyConnect modules are installed on a PC, which module must be installed first?
A. telemetry
B. web security
C. VPN
D. NAM
E. DART
F. posture
G. CSSC
200-355 vce Correct Answer: C

QUESTION 40
Which two factors must be considered when evaluating an RF interferer for severity? (Choose two.)
A. distance from the AP
B. dBm
C. the type of security crack being used
D. duty cycle
E. number of interfering IP stations in the cell
F. duplicate SSID
Correct Answer: BD

QUESTION 41 Adam works as a Database Administrator for a company. He creates a table named Students. He wants to create a new table named Class with the help of the Students table. Which of the following syntaxes will Adam use to accomplish the task?
A. CREATE TABLE Class INSERT INTO SELECT * FROM Students;
B. CREATE TABLE Class FROM SELECT * FROM Students;
C. CREATE TABLE Class (SELECT * FROM Students);
D. CREATE TABLE Class AS SELECT * FROM Students;
200-355 exam Answer: D

QUESTION 42 You work as a Database Administrator for a company. The company uses MySQL as its database. You have created two tables named Employees and Departments in the database. Now, you want to display data from both tables. Which of the following actions will you perform to accomplish the task?
A. Join
B. Table Merge operator
C. HAVING
D. GROUP BY
Answer: A

QUESTION 43 Which of the following terms is described in the statement below? “It is procedural code that is automatically executed in response to certain events on a particular table or view in a database.”
A. Data type
B. Table
C. Datetime data type
D. Database trigger
200-355 dumps Answer: D

QUESTION 44 You work as a Database Administrator for a company. The company uses MySQL as its database development platform. You have created a table named Employees in the database. You want to display the names of the employees whose salary is more than $5000, but you do not want to display any duplicate content. Therefore, you have written the following query:
SELECT emp_id, DISTINCT emp_name WHERE salary > 5000 FROM Employees; Which of the following statements is true about the above query?
A. The statement will display only unique names whose salary is more than $5000.
B. The UNIQUE clause should be used in place of the DISTINCT clause.
C. The statement will give an error.
D. The statement will display those records whose salary is more than $5000.
Answer: C

QUESTION 45 Fill in the blank with the appropriate word. The data type defines a date that is combined with a time of day along with fractional seconds that is based on a 24-hour clock.
A. datetime
200-355 pdf Answer: A

QUESTION 46 You work as a Database Administrator for a company. The company uses MySQL as the database platform. You have created a table named Students in the database. The structure of the table is as follows:
Stu_IDNUMBER (3) PRIMARY KEY
Stu_NameVARCHAR2 (25) NOT NULL
Fee NUMBER (8, 2)
Class NUMBER (5);
You have executed the following statement for the table “Students”:
SELECT e.Stu_Name, m.Fee
FROM Students e, Students m
WHERE e.Stu_ID = m.stu_ID;
Which of the following join types have you used in the above statement?
A. Cross join
B. Equijoin C.
Self join D.
Outer join
Answer: C

QUESTION 47 Fill in the blank with the appropriate word.
A specifies that the value of a column (or columns), upon which the index is based, must be unique.
A. unique index
200-355 vce Answer: A

QUESTION 48 You work as a Database Administrator for a company. The company uses MySQL as its database. You have created a new table named Employees, which keeps all the information of the employees. You want to add a new row to the Employees table. Which of the following statements will you use to accomplish the task?
A. INSERT (column1,column2, …columnN) INTO VALUES(value1, value2, …valueN);
B. INSERT INTO (column1, column2, …columnN) VALUES(value1 ,value2,…va lueN);
C. INSERT (column1, column2, …columnN), VALUES(value1, value2, …valueN);
D. INSERT INTO (column1, column2,… columnN), VALUES(value1, value2,…v alueN);
Answer: B

Pass4itsure has started for many years in providing the IT certification Cisco 200-355 (Implementing Cisco Wireless Network Fundamentals) exam preparation materials. This is possible location of the international unique found Cisco or this is why it is indeed a simple test at the same time, the organization to the 200-355 dumps Cisco exam in order to attain the most coveted CCNA Wireless certification, which is designed to help candidates prepare for and pass the Cisco 200-355 exam.

200-355 dumps

See What Our Customers Are Saying:

To develop the infrastructure or the projects, pass4itsure 200-355 dumps WIFUND CCNA Wireless certification test questions is a helpful tool. Sometimes you can get really frustrated due to failure of getting your job desires. The Implementing Cisco Wireless Network Fundamentals can help you become a professional.

pass4itsure 200-355 dumps

Don’t mess around searching for study guides, here is our top recommendations. Unlike other websites, Pass4itsure.com is dedicated to provide 200-355 dumps practice exam questions and answers, FREE of cost. To view the full database FREE material, sign up for a free account with Pass4itsure.

New Updated Pass4itsure Cisco 200-355 Dumps Implementing Cisco Wireless Network Fundamentals Exam Video Tests Is Your Best Choice Free Download. Pass4itsure 200-355 Dumps Exam Youtube Free Online Test Here: