Anyone done the Cisco 200-155 dumps? “Introducing Cisco Data Center Technologies” is the name of Cisco 200-155 exam dumps which covers all the knowledge points of the real Cisco exam. Money back guarantee helpful Cisco DCICT 200-155 dumps exam certification with new discount. Pass4itsure Cisco 200-155 dumps exam questions answers are updated (85 Q&As) are verified by experts.
The associated certifications of 200-155 dumps is CCNA Data Center. We felt the same way and took the 200-155 dumps study guide making out of the hands of amateurs and have created https://www.pass4itsure.com/200-155.html dumps exam questions and answers.
Exam Code: 200-155
Exam Name: Introducing Cisco Data Center Technologies
[Updated November 2017 Cisco 200-155 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWNHFtR0VqbXVEeUU
[Updated November 2017 Cisco 210-260 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWU0xad3NvRWR4Qzg
Which two Cisco Nexus 1000V Series Switch features exceed the functionality of the VWware vNetwork Distributed Switch? (Choose two )
1.access control lists
4.port state migration
5.DV Port Groups
200-155 exam Answer: AB
When using a Cisco UCS Director, a typical workflow consists of which two terms? (Choose Two )
Which model is a deployment model in cloud computing?
200-155 dumps Answer: A
Which statement about a bridge domain is true?
A bridge domain must be liked to one internal network and one external network
A bridge domain must be linked to a physical domain
A bridge domain typically has at least one subnet that Is associated with it
A bridge domain must have at least one external network that is associated with it
Which two options are primary elements of a tenant? (Choose two )
200-155 pdf Answer: BC
QUESTION NO: 77
What impact does the 3-bit User Priority field in an 802.1q frame have to help voice quality in LAN based communications?
A. It stipulates the format of the MAC address for each network host.
B. It names a collision domain.
C. It replaces a system’s MAC address.
D. It identifies the prioritization settings.
QUESTION NO: 78
You need to choose a codec according to the following parameters:
– The codec should be standard for convergent voice and video calls.
– Due to the limited capability of the IP phones, the codec should require as little computation power as possible.
– The codec should create voice at a bit rate of 8 Kbps. Which codec should you choose?
200-155 vce Answer: D
QUESTION NO: 79
Consider the following IP address in CIDR notation:
How many addresses can theoretically be in each subnet?
QUESTION NO: 80
You want to connect a PBX made by one manufacturer to another PBX made by a different manufacturer. You need to ensure that these interconnected PBXs will retain their basic and supplementary services. Which protocol was originally designed to allow this?
200-155 exam Answer: D
QUESTION NO: 81
What is the term for assigning a unique VLAN identifier to traffic controlled according to 802.1q standards?
A. Frame tagging
B. VLAN switching
C. Packet injection
D. LAN segmentation
QUESTION NO: 82
Which of the following is most likely to cause packet loss and clicking during a phone call?
A. Impedance mismatch
B. Improper reference clocking
C. Improper equipment grounding
D. Packets arriving out of order
200-155 dumps Answer: B
QUESTION NO: 83
Which of the following encodes messages in ASCII, uses proxies instead of gatekeepers, and is a peer-to-peer protocol?
D. The local loop
QUESTION NO: 84
Which of the following can cause the most significant interference with WiFi communications?
A. Ethernet hubs
B. Television equipment
C. 2.4-GHz cordless phones
D. 900-MHz cordless phones
200-155 pdf Answer: C
QUESTION NO: 85
Which device specializes in admitting calls into a network, manages session traffic, and helps traffic traverse a firewall?
A. Layer 3 switch
B. Multipoint Control Unit (MCU)
C. IP Multimedia Subsystem (IMS)
D. Session Border Controller (SBC)
QUESTION NO: 86
When data is sent down to the session layer of the OSI/RM, the PDU consists of which encapsulated components?
A. Physical header, network header, data
B. Data, application header, presentation header
C. Network header, data link header, physical header
D. Application header, presentation header, transport header
200-155 vce Answer: B
QUESTION NO: 87
A traditional PBX generally offers all of the following features EXCEPT:
A. Voice mail
B. Call forwarding
C. Call interruption
D. Find me/follow me
QUESTION NO: 88
You are implementing an IPsec VPN for voice calls. These calls will pass from one corporate firewall to another. Both firewalls use Network Address Translation (NAT). Which form of IPsec will you implement?
A. Tunnel mode using the AH security protocol
B. Transport mode using the AH security protocol
C. Tunnel mode using the ESP security protocol
D. Transport mode using the ESP security protocol
200-155 exam Answer: C
QUESTION NO: 89
Which problem typically occurs if a jitter buffer is too small?
A. Too many delays will occur.
B. Too few packets will be re-sent.
C. Too few interfaces will be addressed.
D. Too many packets will be discarded.
QUESTION NO: 90
You work as a software developer for ManSoft Inc. The company uses Visual Studio .NET 2005 as its application development platform. You use C#. NET to create an assembly that will be consumed by other Visual Studio .NET applications. No Permissions should be granted to this assembly unless the assembly makes a minimum permission request. You need to write a code for the assembly that makes a minimum permission request. Which of the following code segments will you use to accomplish this task?
A. [Assembly: PermissionSet(SecurityAction.PermitOnly, Unrestricted = true)]
B. [Assembly: PermissionSet(SecurityAction.RequestOptional, Unrestricted = true)]
C. [Assembly: PermissionSet(SecurityAction.PermitOnly, Unrestricted = false)]
D. [Assembly: PermissionSet(SecurityAction.RequestOptional, Unrestricted = false)]
200-155 dumps Answer: D
QUESTION NO: 91
You work as a Windows Application Developer for ABC Inc. The company uses Visual Studio.NET as its application development platform. You create a Windows application using .NET Framework 2.0. The application allows computer engineers to design circuit boards for different types of hardware. You create a custom control that represents the design surface. You are required to highlight the vacant areas on the design surface where a component can be dropped. Which of the following events will you use to accomplish this task?
QUESTION NO: 93
You work as a Web Application Developer for SunInfo Inc. The company uses Visual Studio 2008 as its application development platform. You create a Web application using .NET Framework 3.5. You want to redirect users to a default error page if an unhandled error occurs within your site. Which of the following actions will you perform to accomplish the task?
A. Set the mode attribute of the customErrors element to Off and the defaultRedirect attribute to an error page within your site.
B. Set the statusCode attribute of the error element to 404 and the redirect attribute to a custom error page.
C. Set the redirect attribute of the error element to an error page within your site.
D. Set the mode attribute of the customErrors element to On and the defaultRedirect attribute to an error page within your site.
200-155 pdf Answer: D
Pass4itsure experts and 200-155 professionals always try their best to solve the problems which are asked by the customers on 200-155 dumps exam. With the help of Pass4itsure 200-155 dumps DCICT questions,, you can achieve your carrier goals and become a certified in CCNA Data Center https://www.pass4itsure.com/200-155.html dumps test.
Read More Youtube:https://youtu.be/we3j96ptWco